Telonic have introduced to the UK market the Kikusui KPM1000 Power Meter, it was designed primarily for measuring the standby power of consumer and commercial products. The KPM1000 accurately measures low level single phase standby power and higher power levels too. Over the past few years, each region of the world has been putting their effort in to establishing regulations related to efficient design such as ‘ErP Directive’ in Europe, ‘Energy Star’ in the US, ‘Top Runner Method’ in Japan.
The KPM1000 complies with standard IEC62301 (Household electrical appliances – Measurement of standby power) and it is capable of measuring the standby power consumption required by the ‘ErP Directive Lot6’. The KPM1000 is a compact, light-weight, low priced power meter equipped with RS-232C as standard; both GPIB and USB are offered as options.
5mA/ 10mA/ 20mA/ 50mA/ 100mA/ 200mA/ 500mA/ 1A/ 2A/ 5A/ 10A/ 20A/ Auto range
Voltage, Current, Active power, Apparent power, Reactive power, Power factor, Phase angle, Frequency, Accumulated current, Accumulated power, Positive direction accumulated power, Negative direction accumulated power, Accumulated time, Voltage crest factor, Current crest factor, Voltage peak, Current peak
High precision measurement
Basic accuracy of the Voltage, Current, Power ±(0.1%reading+0.1%range). Capable of measurements with Crest Factors UPTO 6, it can also measure the precise RMS and PEAK values too.
Controlled by the PC
The dedicated application software enables you to control the KPM1000 through the PC as same as panel operation. Furthermore, the long-term data can be acquired just like a data logger.
Displays 4 items of data
No need to switch over the measuring items, it displays four measuring items at the same time