The Wireless Multi Instrument Synchronization Module type WCMI-8, the world’s first module to
wireless synchronize multiple oscilloscopes over a long distance of up to 400 meters and combine them to a single instrument. The WiFiScope and Handyscope series 5 and 6 instruments are
suitable to be used with the WCMI-8 module. The WCMI-8 module is placed on the extension connector at the rear of each oscilloscope and the Multi Channel oscilloscope software automatically
detects how many instruments are equipped with a WCMI-8 module. All detected oscilloscopes, connected via WiFi, LAN or USB, are combined to one single oscilloscope with a total number of
channels that equals the sum of the number of channels of the detected oscilloscopes. The WCMI8 module has an internal automatic time synchronization system that takes care that all sample
clocks of the oscilloscopes are synchronized. When a trigger occurs on one of the selected channels, all oscilloscopes will be triggered simultaneously and all signals will be synchronously visible on the display.
The Wireless Multi Instrument Synchronization Modules can be used both indoors as in the open field. With the built-in RSSI
meter, the receiving signal strength of each Wireless Multi Instrument Synchronization Module can be checked.
When synchronous measurements are required at multiple locations that are up to several hundred meters apart, or fully galvanically isolated from the computer and each other, the Wireless Multi Instrument Synchronization Module in combination with a
TiePie engineering oscilloscope offer the required solution. High speed sampling at 100 MSa/s and 16 bit high resolution measuring are supported by the WCMI-8 module. No long cabling is required between the scopes and the computer and no complicated
setup is required, resulting in a simple and hassle free installation.
Yet again the TiePie motto applies: plug in and measure.
For more info on the Wireless Multi Instrument Synchronization Module see www.tiepie.com/wcmi
About TiePie engineering
Founded in 1987, the Dutch company TiePie engineering has become a recognized manufacturer of high quality computer controlled test and measurement equipment, such as WiFi, LAN and USB oscilloscopes, arbitrary waveform generators, function generators, spectrum analyzers, protocol analyzers, data loggers and multimeters. The TiePie products offer innovative and unique
features such as real time SureConnect connection testing, SafeGround protection and combining multiple instruments using
TiePie’s sophisticated CMI bus. TiePie’s compact oscilloscopes, function generators and other data acquisition products are being
used worldwide in many markets, including industrial process automation,
TiePie engineering
Koperslagersstraat 37
8601 WL Sneek
The Netherlands
Tel.: +31 515 415 416
Fax: +31 515 418 819
E-mail: sales@tiepie.nl
www.tiepie.com
