Verotech has introduced eleven new modular pluggable power converters specifically designed to be fully compliant with the PICMG 2.11 Power Interface specification.
To meet the cPCI high current requirements on the 3.3 and 5V rails, the units feature two independent converters operating in parallel, enabling, for example, the 300W unit to provide 30A at 5V and 40A at 3.3V simultaneously.
All versions are 8HP wide and are available with either 18- 36VDC, 36- 72VDC or autoranging 85 – 264VAC inputs to suit a wide variety of potential applications.
3U versions are rated at 200 or 300W, 6U ones at 350, 400 or 500W. Additionally, the +12V output is rated at 5A and the -12V at 1A.
The units feature active power factor correction to achieve a typical power factor of 0.98, and efficiency is greater than 80 percent at full load.
They are hot swappable, have high temperature shutdown with auto recovery, overload, over-voltage and short circuit protection and operate at full load up to 55°C without derating subject to forced air cooling at 250 linear feet/minute.
Line regulation is ±0.5 percent, 3.3V and 5V load regulation ±1 percent, 5V ripple is 60mV p-p.
Verotec
